Nowadays, you see upholstered furniture everywhere, because it is now in trend, and has made itself much appealing, regardless of its expensive cost. However, an upholstered chair or sofa placed in your living place intensifies the entire beauty of that area. Most people spend a lot of money on purchasing upholstered furniture, while you can make it on your own without wasting a lot of money.
Here in this article, you will get to know a complete step-by-step guide on how to make upholstery or how to upholster your chair or sofa so that they could make your living space worth appealing by their grace and style. All you have to do is just follow all the steps properly, and you are good to go.
Some Amazing And Incredible Steps On How to Make Upholstery / How to Upholster the Sofa or Chair
It will be great if you make the upholstered sofa or chair on your own, because it’s gonna entertain you in two ways, i.e. save your money, and make your living place look much more attractive. To provide you ease in the completion of this task, here are some simple and easy steps that, when you get followed properly, could help you a lot in upholstering your furniture pieces.
1. Material You Will Need in the Upholstering Process
First thing first, you will need the fabric, of course, without which you can’t do anything. The fabric should be durable enough and should be perfect according to the piece of your furniture. After that, get some inexpensive puffy sheets of cotton wadding or batting so that you will get a cushy puff under the fabric. In addition, you are going to need a staple gun rather than a thread and a needle.
To tape the flourishing in, i.e. nail heads, or grommets, you will need a hammer. Lastly, go and get some upholstery tack strips. Make sure that those strips should be skinny and are made up of double-stick cardboard.
2. Unscrew the Seat of the Chair or Sofa
How to make upholstery, in the very first place, you should remove the piece, i.e. seat of your chair or sofa, that you are going to upholster. Unscrew it in a very careful manner, and put all the nuts aside so that you could easily screw it back after getting it upholstered.
If it was already being upholstered and got torn, then remove the fabric. While you remove all the pieces from it, mark each location of it with the help of a marking pen, so that it will be easy for you when you will upholster it by yourself.
3. Cover it up with the Batting
If you are going to replace the old upholstering with the new one, then remove that old batting after removing the fabric from it. Remove the batting from all over it, i.e. from the back, from the front, and the seat. Now, if there are any damages, then get them all repaired quickly. For a more adorable look, you can sand, prime, or even paint the frame, and then let it dry.
After that, cut the piece of batting, which should be almost ½ inches thick so that it could give you a proper cushy puff. Now, start covering the back of the chair and get it stapled. After stapling, if you want to hide the indents of it, gently pull the batting around each staple so that the staple will get inside the batting, giving a proper finishing. And, in the same manner, cover the seat of it with batting, folding it neatly around the corners.
4. Make Unique Patterns of Upholstery Fabric
As we discuss how to make upholstery, first thing first, place the original upholstery pieces on the new fabric, to get the idea of how much of the fabric is going to be used in the complete covering of your sofa, or chair. After getting a complete idea, now pin it down on the place and cut the fabric around the pattern, leaving 2 to 3 inches of fabric to get the edges stapled with a neat finish.
Now, cut out the fabric for each section in the very same manner, and get it marked with a pen marker, from where it’s gonna get stapled. After cutting all the sections, now it will be easy for you to cover each part of it with the fabric.
5. Get the Fabric Attached by Stapling
After doing all the above steps properly, now place each piece of fabric, first on the seat, and pin the pieces together after adjusting them correctly. If you find the fabric extra from the edges, trim it down so that it could gain a neat finishing. When you get satisfied with the placement of the fabric, pull the fabric taut, and get it stapled.
Get it stapled as many times as you can to secure the fabric, and to keep it smooth. In the very same way, cover every part of it, i.e. front, back, and the other side of the seat. Secure the fabric with a staple. After that, apply the tack strips where needed, i.e. top of the back. Then get it tucked from the raw-edged to give it a proper finishing, thus making your sofa or chair look adorable. After that, screw the seat up again on the chair, and let it intensify the entire beauty of your home décor.
To Sum Up
At the end of this article, I will highly recommend following these easy and simple steps for how to make upholstery of the sofa or chair on your own, without hiring any professional services, thus saving a lot of money.
If you follow these steps properly, no one could tell if it is upholstered by a professional or by your own, and your place will gain the same attractive look as it will gain when you install the pre-made upholstered furniture in your area.
